Kroger Essay Example

Kroger Essay The site I found my information on about the salary range of my career choice is AMA American Medical Association. I believe this site is reliable because its a medical website that shows you different medical careers, it have a publications, mission statement, and AMA been around since 1847. While looking on the site it didnt have Health care manager it have Health information administrator, but its the same career. It have the salary range from 2003, so by now the salary should have gone up and from the 2003 salary range this is the career I want to go into. Starting Salary 40,000 Over average 54,700 Upper ranges 85,000 1 know that I would have to work myself up to the upper ranges, but would love to start at the over average. American Medical Association. (2003). Education. Retrieved from www. AMA-ass. Org/AMA/pub/education-careers/careers- health-care/health-care-income. Page Library Search Looking on the online library, I located a Journal article named Environment Scanning and the Health Care Manager. The article was very interesting to me because its for new managers coming into the work place making strategic plans for the environment that they are managing. It ivies me ideals of what I should do as a health care manager when I go into a health care facility. The article explains if you dont take the time to make strategic plans for environment the facility you work could get lose money, staff, or even close down. As a manager you should know what you are dealing with In the work place and make plans to deal with them. We will write a custom essay sample on Kroger specifically for you for only $16.38 $13.9/page Order now We will write a custom essay sample on Kroger specifically for you FOR ONLY $16.38 $13.9/page Hire Writer We will write a custom essay sample on Kroger specifically for you FOR ONLY $16.38 $13.9/page Hire Writer

Curriculum Restructuring in Great Meadows Middle Schools

Curriculum Restructuring in Great Meadows Middle Schools The decision of Great Meadows Middle schools to incorporate an advanced integrated curriculum was appropriate. The gradual change in the curriculum from subject-based approach to a life-applicable approach would prepare the students for the real life situations.Advertising We will write a custom essay sample on Curriculum Restructuring in Great Meadows Middle Schools specifically for you for only $16.05 $11/page Learn More The educators gradually incorporated the curriculum to ensure that students, facilitators and other stakeholders were not shocked with an abrupt change in the mode of teaching and learning. The time lag was considered essential for the students to adapt to the changes in curriculum, and allow skeptical individuals to realize the benefits of the switch with time (Manning and Katherine 118). Furthermore, the enthusiasm held by the teachers addressed the necessity of the change since they were responsible for implementing the changeover. A pr e-assessment made to evaluate the benefits and ability of the school’s curriculum shift was commended because it gave the facilitators an assurance of its capability to complete the shift. It ensured that its interdisciplinary teams were made aware of their responsibility to draw the units necessary for the change. Additionally, the advantages held by the school on its capability to execute the block arrangement of learning periods would ensure adjustment to the needs of the curriculum change (Olson 46). The choice of themes generated by the teachers while focusing on the student’s needs would be effective. This is attributed to the teachers’ awareness of the challenges that students face in the current world, and the required skills of overcoming them. The integration of student-focused themes within conventional circular areas ensures a smooth paradigm switch in the mode of learning. Furthermore, it provides a room for the introduction of vital perspectives in learning such as cultural, economic, and social issues, which ensures an all-round growth of the learners (Manning and Katherine 119).Advertising Looking for essay on education? Let's see if we can help you! Get your first paper with 15% OFF Learn More Several issues may also challenge the effectiveness of the curriculum switch. The inherent problem in the integrated model is the generalized mode of teaching. Critics argue that within this system, subjects are taught in a manner that limits the students from selective specialization in learning. This means that teachers can major on one theme at the expense of other themes since it is impracticable to major in all fields. Since there was a provision for the fine-tuning in the previous integrated themes, a disparity will be faced between the competence of the students who used the earlier themes and those students who later adopt the refined themes. Motivation and enthusiasm of teachers, facilitators and othe r stakeholders within the integration period cannot be assessed. The challenges face by educators while switching may make them grow weary, and thus, render the change unsuccessful and ineffective. Moreover, some facilitators may feel overworked, as their expertise and time might be utilized more than individuals whose specialization is minimally required within the new curriculum (Olson 78). In essence, the success of the change depends on the ability to cater costs of resources required for use in the new mode of learning such as computers, internet among others. Effectiveness of the integration model of learning adopted in the school depends on the modes of learning used in higher institutions of learning. The school would have made an earlier assessment of the continuity of the curriculum to ensure a smooth transition in the institutions. Therefore, a consideration for the success in academic life must be put in place before implementing any curriculum switch within any academic level. Manning, Lee, and Katherine Bucher. Teaching in the Middle School . New York:Pearson/Merrill Prentice, 2004. Print. Olson, John. Classroom knowledge and curriculum change. New York: McGraw Hills, 2009. Print.Advertising We will write a custom essay sample on Curriculum Restructuring in Great Meadows Middle Schools specifically for you for only $16.05 $11/page Learn More

African American vs. Caucasian Americans Essay Example for Free

African American vs. Caucasian Americans Essay African (466) , White American (21) company About StudyMoose Contact Careers Help Center Donate a Paper Legal Terms & Conditions Privacy Policy Complaints ? At first glance some people might consider this paper to be on the racial side, however it was all written by observations made. There are many differences between African Americans and Caucasians, some people don’t see the differences because of ignorance . You must read the paper with an open mind and take none of this to heart. African American and Caucasians function differently in public surroundings. When you see a young African American you usually see them in groups of four of more. However, when one of them gets into a disagreement five to ten more show up in their defense. They are a very close knit group of individuals. I have also noticed that when you see a young African American walking around they are usually singing, talking very loud or running around. Also when they are in groups they are very loud and take over the area that they occupy. On the other hand when you see Caucasians they are rarely in groups of three or more. To top it off when someone in one of their groups gets in trouble the rest of the group is nowhere to be found. Most times when you see young Caucasian people in a group they are for the most part within a normal speaking level. These two groups tend to act differently in the public due to their cultural differences. There are a number of differences between the churches of African Americans and Caucasians. At most typical African American churches there are no true sermons. The African American churches tend to do more entertaining rather than teaching. They also do a great deal of singing and dancing involved in there praising of God. They emphasize fellowship in their churches especially after church when they all gather and close the celebration with a meal together. However at a typical Caucasian church there are a few differences. To start it off when you first walk in you get a program detailing what will be happening through the service. They tend to structure the whole service around a sermon or story. The service every week is very predictable as to what will happen. The Caucasian churches are more there to teach the ways of the lord as they have interpreted it. Although not all the African American and Caucasian churches are along this line a majority of the main stream ones are. African American vs. Caucasian Americans. (2016, Dec 16).

Drawing on a discussion of major theoretical perspectives in Essay

Drawing on a discussion of major theoretical perspectives in philisophy, and developing your own philosophical arguments, critic - Essay Example In undertaking this task, the writer is aware that one cannot fully encapsulate in one setting the entirety of the notion of sports, however, it hopes that as the paper continues some of the vagueness that some of the attributes inhering the concept may be clarified and establish a clearer notion of sports. SPORTS: WHAT IS IT? Morgan (1976) has looked into the discussion between Huizinga and Gerber regarding the notion of play, which , in turn paves for the possibility for the ontology of ports. Huizinga looks into sports as play (Morgan, 1976). In this signification, one can see the equivalence that is juxtaposed between sports and play. According to Morgan (1976), for Huizing ,play is â€Å"an irreducible facet of life whose meaning resides within itself and is not, therefore, contingent on any end it is instrumentally employed, quite incidentally and perhaps inauthentically, to bring about† (p. 25). This whole concept offers the supposition that play is something that is â €Å"non-real† and â€Å"non serious†, a â€Å"free activity standing quite consciously outside ordinary life. If this kind of reasoning is pursued and associated with sports considering that there is a presupposition that Huizinga is looking at sports a play, it opens the notion that sport ahs intrinsic value that is or used not because of any extenuating factors that influence the players, but it is engaged in for its own sake. At this point Gerber, argued that there is seeming misunderstanding of the concept of ‘to be’ in Huizinga’s concept of ‘play is nonreal’ (Morgan,1976). She maintains that there is no ontological impossibility in assuming that play is non real since how can a real person be in play and yet at the same time maintain there is ‘non realness’ in the experience. Morgan (1976) untangling g the dilemma, proposes the position that the term ‘to be’ in the statement â€Å"play is non real† is to be understood as not referring to existential ‘is’, but should be understood in the context of the Platonic ‘to be’ which, is a signifier for differentiation and variation but not necessarily referring to existence. This means that the ‘to be’ is not an existential is which denotes the notion that there is no question pertaining to the idea of realness in connection with existing. This position is further supported by the Heideggerian distinction between the ontic and ontology . as a point of clarification, ontic is knowledge base on the actual experience whereas the Heideggerian ontology refers to a prior experience of the phenomenon that allows for the formulation of the criterion that enables one to understand the events not because one has experienced, but because one has extracted from the categories, which makes the phenomenon what it is, and in this sense the phenomenon is play. In this regard, Morgan(1976) has presupposed that Hu izinga has misappropriated the terms ‘non real’ when associated with play in the context that it is justified on the premise of the Heidegerrian ontic sense, yet it s is seeks to provide a way to come out with the ontological validity for the concept of play. Gerber has clearly noted this in the counter argument against Huizinga when she

Business career of Sam Walton Research Paper Example | Topics and Well Written Essays - 500 words

Business career of Sam Walton - Research Paper Example In the same year, Walton paid $25,000 to the owners of the Ben Franklin stores for the rights to franchise the store. According to Tedlow (2001) Walton was inexperienced at running a business and he did not know what to do with a variety store. In fact, the only experience Walton had was from working retail at J.C. Penny’s (Brooks, 2012). Walton had paid too much for the store and was also paying too much for rent. Both of these issues could have meant failure for Walton but he did not fail. The first step for him was to go to a two week training program that was provided for franchise owners. Next, he studied his competition that happened to be across the street from him, and he read retail publications (Tedlow, 2001). He soon learned how to run the business, learned all the rules, and then found ways to break the rules that did not make sense to him. Walton was inspired by what he learned in retail and wanted something bigger. He also wanted to provide more value for his customers. He decided it was time to open a larger store, which became the first Walmart (Walton, 2012). Walton had backers until he decided to cut prices, and his backers felt this was not a good idea. He started Walmart with his own funds (Brooks, 2012). One of the reasons that Walton was successful was because in the early days, he cared about his employees and his customers. He realized that if he had lower prices than his competitors, he would have satisfied customers. He also realized if he treated his employees well and taught them how to take care of the customers, he would have successful employees and customers (Walton, 2012). By 1967, Walton owned 24 stores and was making $12.7 million in sales (Duke, 2012). In 1969, Walton incorporated Walmart and by 1970 they went public (Duke, 2012). Walton attributed the success of Walmart to his employees who were the ones who worked directly with the customers (Walton, 2012). In 1971, Walton opened his

Ergonomics with Hand and Power Tools Essay Example for Free

Ergonomics with Hand and Power Tools Essay Ergonomics, derived from the root word ergon which means work and nomos which means laws, is the study of the related interaction of humans and the objects being used to perform a specific task, process, or function. It is considered system-oriented regulations and practices applicable to various facets of human activities. Its main concern is on optimizing human performances and well being at the same time achieving a desirable system output or performance. In a simple term, correct ergonomic design will prevent humans or workers from repetitive or continuous injuries due to strain or stress on a specific part of their bodies, which if not corrected will lead to a possible long-term injury or worst, disability. To achieve this objective, humans or the workers must â€Å"fit† to the given tasks or work. Their limitations and capabilities are given into account to ensure that the equipment, tasks, output information, and the environment will suit each worker. To access the person and their related work, the ergonomists (individual specializing on ergonomics design) considers the tasks being done and its related demands towards the worker; the necessary equipment (shape, size, process); and the information being used (how it is accessed, changed, or presented). Usually, ergonomists utilizes references from other field of disciplines such as mechanical engineering, industrial engineering and design, anthropometry, physiology, psychology, and biomechanics. Often times, the principles of Ergonomic can be seen on the innovation of the equipment or machine, and the creation or enhancement of safety procedures. The field of ergonomics is actually divided into three major domains: The Physical ergonomics, which is concerned with the human physiological, anatomical, biomechanical, and anthropometric characteristics, as they are associated to specific physical activities. Examples of which are the postures during work, layout of the workplace, health and safety, handling of materials, continuous repetitions of movement; the Cognitive part of ergonomics which is concerned with the mental activities such as memory, perception, reasoning and psychomotor responses, as these influences the inherent interactions between humans and the system (tasks, machines or equipment, and information). Examples of which are the human and computer interactions, decision making, and mental work stress and work load; the Organizational ergonomics which is concerned in optimizing systems with respect to organizational structures, processes, procedures, and policies. Examples of which are ergonomics within the community, crew communication and resource, quality management, virtual organizations, and teamwork. Aside from this three major domain, there are five aspects of ergonomics, which concerns on the following: Aesthenics – example is the signage used in the workplace in such a way that it would be pleasing and at the same time provides information will be very much accessible to the workers. Comfort – example is the design of an alarm clock should give emphasis on its contrast in the dark so that eyestrain can be avoided. Safety – example is the labeling on the bottle of medicine should be ergonomically designed in terms of color and size of letters so that the patient with impaired visions can see more clearly the dosage. Ease of use – example is the street light should be strategically and visually located to be accessible to the motorists so that possible accidents may be prevented. Performance and productivity – example is the use of a specific machine in the sense that the worker must be ergonomically situated to prevent accident and maximize performance and productivity. Consequences of ignoring ergonomics include some but not all of the following: strain and injuries, increase lost time, less output in production, high material and medical costs, absenteeism, increased probability of work-related errors and accidents, and low quality of work (Holland, 2000). History The foundation of ergonomics have been seen in the culture of the Ancient Greece around 5th Century in the design principles of their hand tools, and workplaces. Very eminent were the hand tools in the form of axes, adzes, cramps, vices, benches, planes, gouges and chisel, pliers, pincers saws, rasps, and files. The usual handle at that time was made of wood and the antlers of reindeers were sharpened to create a sharp edge. The wooden handle was not smooth and has curvatures to fit the grip of the user. The sharp edge was almost tied to be perpendicular to the handle so that the worker’s arm can have a thrust on the object being cut. Since ergonomic was not prevalent at that time, the design of the handle as well as the orientation of the sharp edge illustrates the principle of ergonomics. These materials were used during 6000 BC then at around 3000 BC bronze and copper materials replaced the sharp edges. Screw vices were eminent during the 17th century Roman and Greek period. pegs were driven unto pre-bored holes on top of the bench. Again these were made of wooden parts not until the early 19th century that it was replaced by metal cramps and the design was changed to a â€Å"G† cramp structure. Planes during the 17th and 18th century manifests carved decorations and scrolled handles. During the 19th century major improvements were made wherein double cutting edge and iron were designed to prevent tearing. Early hammers were in the form of simple hand- held stones and made of iron, bronze, and steel. The early Romans used nails that lead to the development of the claw hammer at present (Marmaras, 1999). The evolution of power tools began in 1813, when a shaker in the name of Sister Tabitha Babbit, had a vision of a teeth ringing around a rim of the wheel spinning. This led to the development of the principles of sawing. Before Babbitt’s vision, sawing usually comprised of two-long ripsaws handled by two workers from one end to another. The spinning wheel were soon incorporated by circular blade then later on being run by machines through electricity rather than being actually performed by humans. The principle of the spinning wheel design contributed to the innovation of the sawmill. Ergonomically, the two-long rip saw proved to be very inadequate for two workers were needed to accomplish the task. In the development of the spinning wheel, one person is only needed to accomplish the task enhancing productivity. In 1867, Wilhelm Fein developed the first power hand drill through incorporating a minute electric motor to able to drill. Ergonomically, both hands were used to hand drill cast- iron and heavy metals, and shoulder strap and breastplate were used to prevent injury. Justus Traut, an employee of Stanley Rule and Level co. , developed the first ergonomically designed handles designed to make tools easier to hold such as block planes and levels. The patent was known to be the â€Å"Hand-y† grooves. Edmund Michel and Joseph Sullivan, in 1923, created a circular saw, which was in the form of a power hand tool to cut specifically lumbers, which was eventually called the â€Å"Skillsaw†. The evolution of hand and power tools is vast that only brief descriptions are given above. The principles of ergonomics can be seen on every design with emphasis on the functionality and safety of the user. Innovations on the materials used were obvious and technology changes the type of materials, design, and procedures, in conjunction with sound ergonomics principles (Sanders, 1993). Ergonomics applied to Hand and Power Tools Tools are considered one of the equipment being used in everyday activities. Whether it is intended for work, house hold activities, or creating something during leisure times, the necessary knowledge on the nature of the tools, how it is being operated, its corresponding risks, and the proper ergonomic procedures should be considered. Usually, tools are manufactured with safety taken into consideration when it is being used by humans or by the workers, but it can still possibly pose relevant hazards when used inappropriately. Tools are categorized into two parts: The non-powdered tools which includes screw drivers, pry bars, wrenches, axes, etc. ; and the power tools, which utilizes electricity to become functional, includes, hydraulics, electric- pneumatic, and powder actuated. The applications of Ergonomics manifested on the safety of the user and to their co-workers, to the quality of work and the overall process. Hazards should be considered as a basis for an ergonomic recommendations and approaches. Hazards of Using Hand Tools The hazards of using hand tools may emanate from the user itself: improper handling and maintenance, and misuse. Ergonomic Recommendations Since the hazard on using hand tools greatly depend more on the nature and awareness of the user, the following ergonomic solutions are advised: †¢ The worker or the user has a direct responsibility for the maintenance, proper use, and safe conditions of the hand tools being used. †¢ The workers must be trained that sharp ends of the hand tools such as those of knives and saw blades should be kept directed away from other nearby workers. †¢ Scissors and knives should be kept sharp at all times since dull tools can be more dangerous than sharp ones. †¢ The working area or specifically the floors should be kept dry and clean at all times to prevent workers from accidentally slipping with a sharp hand tool on their hands. †¢ On working inside a flammable substance environment, spark-resistant tools should be made for hand tools such as aluminum, brass, plastics, or wood. Power Tools Hazards When not properly used, power tools can cause harm and injuries, since it is utilizing electricity to operate. Ergonomic Recommendations †¢ Avoid carrying the tool by using hose or cord. †¢ Do not attempt to pull the hose or the cord to disconnect it from the receptacle. †¢ Tools should be disconnected from the power source before charging or servicing parts. †¢ Both hands should be used to operate the tool; secure the work with a vise or clamp. †¢ Keep the finger away from the on button unless the tool is to be operated. †¢ Keep the manufacturer’s manual for maintenance instructions on lubrication and changing parts. †¢ Always maintain good stance or balance when utilizing power tools. †¢ Avoid wearing accessories that may interfere when using power tools. †¢ Tag tools that are defective and keep it away from the working tools. Different ergonomic approaches are also considered on Guards, electric tools, powered abrasive wheel tools, pneumatic tools, powder-actuated tools, hydraulic tools, and jack hammers. Guard †¢ The safety guard should never be removed whenever a power tools is in operation. Electric tools †¢ These tools should have a three-wired cord with the third wire being the grounding wire to avoid electric shock. †¢ Always operate electric tools within the limit of their design specifications. †¢ Always wear protective gloves, and safety shoes. †¢ Store the tools in a dry and secured place. †¢ Do not operate the tools on wet or damp places to avoid electric shock. †¢ The working area should be well illuminated. Powered Abrasive Wheel Tools These tools are used for cutting, grinding, and polishing where when utilized may throw off fragments that can harm workers. Whenever this kind of power tool is used, always bear in mind the following ergonomic recommendations: †¢ Always use protection goggles for the eyes. †¢ Do not stand directly in line with the front wheel not until it reached its full working speed. †¢ The wheel should be inspected before mounting it to the tool. †¢ Turn off the power when the tool is not in use. †¢ Never use vise on clamping hand-held grinders. Pneumatic Tools The different types of pneumatic tools are hammers, drills, sanders, and chippers, and usually use compressed air to operate. The hazard of which is that a worker may be stroked by one of the tools fastener or attachments. Given below are some of the ergonomic recommendations. †¢ Always wear eye goggles for protection, ear buds for protection and a face guard. †¢ The hose should be checked if it is fastened securely †¢ A retainer or a safety clip must be installed to prevent the attachments from being drawn towards the barrel. †¢ Protective screens should be set up to protect nearby workers from the fragments †¢ Avoid pointing pneumatic tools directly towards another person or workers. Powder- Actuated Tools This kind of power tools should be treated with extreme caution and only trained personnel can use such tools. Hydraulic Tools †¢ Only use approved fire resistant fluid that can retain its properties when exposed. †¢ Do not exceed the recommended manufacturer’s operating pressure. Jacks †¢ All jacks must always have a form of a safety device that will enable the tool to stop. †¢ The load limit must not be exceeded. †¢ Secure the base to be stable and on a level surface. †¢ Proper maintenance should be observed: regular lubrications and checking on parts for damages. Given above are only some, but not all, of the safety procedures that must be observed in using hand and power tools. These relatively illustrate several safety practices based on the probable hazards among the workers. Since one of the major concerns of ergonomics is the safety of the workers, the procedures above â€Å"fits† workers and equipment to achieve desired result with minimal loss or injury. Generally workers using hand and power tools can be categorized into three model groups: the professionals who are skilled on using such tools; the so-called itinerant worker who is considered to be skilled and trained but with less experience and mostly self-thought; and the last is the one who only purchased a power tool for home use with no professional training after all. Since the first model comprised the professional groups, they can be considered as a skilled worker having sufficient knowledge and training on using such tools. Ergonomic considerations for such users should be emphasized on the safety functions of the tools such as limiting shields, retracting guards, safety catches, locks, and automatic stops. However, on the second and on the third model group, an awareness of the safety standards is a must aside from the safety features of the tools. These safety standards usually contained in the Occupational Safety and Health Hazards lists the minimal requirements on power hand tools. Examples of such are the following: Portable Circular Saws – These tools should be equipped with a guard below and above the base shoe or plate. Swing or Sliding Cut-off Saws – these tools should be provided with a hood that will totally enclose the upper half portion of the saw. Electric Power operated tools – these tools should have double insulation or be grounded accordingly. Hand Tools unsafe hand tools should not be given permit; impact tools should be inspected free of mushroom heads; wooden handles should be free from defects or cracks. Aside from the safety standards, practices and procedures for hand and power tools, several ergonomic innovations are being created to increase the safety of the workers especially for the third model group. Several examples of ergonomic innovations on hand and power tools are the Craftsman’s Twin cutter (Fig. 1), the Arbortech Allsaw 150 (Fig. 2), and the Saw stop system (Fig. 3). These innovations, intended mostly for the third model group, provides safety, and improved functionality to achieve comfortable handles, better balance, and self-holding triggers. Fig. 1 Fig. 2 Fig. 3 Conclusion To eventually avoid the possible hazards associated in using power tools, the workers must learn how to recognize the relevant risks in using such equipment and its safety procedures on handling and using such. All workers must be trained in using hand and power tools to avoid accidents. Safety helmets, goggles, ear buds, and uniforms must be provided to workers exposed on splashing fragments caused by the power tools. Hazardous areas where the power tools are being used should also be in consideration to avoid accidents. Different power tools innovations are now being considered to provide safety and functionality to those who are not a skilled user or worker. Over all, principles of ergonomics apply to broad applications: safety and innovations are some of the very applications of this in relation of utilizing hand and power tools. REFERENCES Hollands, James (2000). Engineering Psychology and Human Performance. Prentice Hall. Karl, Kroemer (2001). Ergonomics : How to Design for Ease and Efficiency (2nd Ed. ). Prentice Hall International Marmaras, Nathaniel (1999). Ergonomic Design in Ancient Times. Prentice Hall. Sanders, Mark and McCormick, Ernest (1993). Human Factors in Engineering and Design (7th Ed. ). McGraw Hill International. Stanton, Nate (2005). Handbook of Human Factors and Ergonomics Models. CRC Press Tilley, Alvin (2002). The Measure of Man and Woman: Human Factors in Design. McGraw Hill.

The Medias Influence on Teenage Suicide Essay -- Teenage Suicide Essa

The Media's Influence on Teenage Suicide   Ã‚  Ã‚  Ã‚  Ã‚  Fiction: Only â€Å"bad† kids who have the wrong friends and bad lives commit suicide. Fact: Kids who have the right friends and a bright future in front of them commit suicide. Fiction: Music, movies, and other forms of media do not influence teenagers in any way, shape, or form. Fact: Music, movies, and other forms of media are influencing teenagers to commit suicide.   Ã‚  Ã‚  Ã‚  Ã‚  Teenage suicide is on the rise at an alarming rate. While depression and other social pressures play a significant role in suicide among teenagers, there is evidence showing that music, movies, and other ways the media portrays suicide as glamorous and noble is having a major influence on teenagers considering suicide.   Ã‚  Ã‚  Ã‚  Ã‚  Every year more than 4,000 teenagers between the ages of 15 and 24 commit suicide and another 400,000 attempt suicide; the number of suicides may be even higher because many suicides are hidden by families who report the suicides as accidents or murders (Klagsburn 16). â€Å"Suicide now ranks as the third leading cause of death among people ages 15 to 24, trailing only accidents and homicides†(Worsnop 371). Over the past four decades, teenage suicide rose a staggering 200 percent (Waters 49). â€Å"Of all the suicides studied among people under 25, nearly two-thirds of them were committed with guns, teenagers who committed suicide by hanging themselves ranked second, and poisoning ranked third† (Colburn 5.)   Ã‚  Ã‚  Ã‚  Ã‚  There are many warning signs of suicide. A teenager contemplating suicide will drop numerous clues before attempting suicide. Such warning signs as withdrawal from the family, changes in eating and sleeping habits, as well as loss of interest in schoolwork or favorite activities, such as participation in athletics. Some teenagers express a preoccupation with pain, death, or suicide. They often talk of death and make actual threats to end their life. Many teenagers will drop verbal clues such as: â€Å"I might as well be dead,† or â€Å"you’ll be sorry when I’m gone.† (Goldstein, 55.) A preparation for death may take place, for instance, giving away prized possessions (Worsnop, 372-73). In some cases, the most ominous sign of suicidal intent is the sudden onset of apparent peace of mind after a long period of troubling behavior. Such a mood change may indicate the person has finally resolved to commit suicide and thus h... ...of Violent Entertainment. New York: Oxford University Press, 1998. Hutchings, David. â€Å"I Started Thinking about Dying.† People. February 18, 1985: 88-89. Keller, Julia. â€Å"Too Regular Shootings Have Left Many Numb.† Chicago Tribune.1 Aug 1999. Klagsburn, Francine. Too Young to Die. Boston: Houghton  Ã‚  Ã‚  Ã‚  Ã‚  Mifflin, 1976. Newton, David E. Violence and the Media: A Reference Handbook. Santa Barbara: Instructional Horizons, 1996. Pond, Steve. â€Å"Student Body Count.† Rolling Stone. April 1989: 38. Royal Commission on Violence in the Communications Industry. Volume 1: Approaches, Conclusions, and Recommendations. Toronto: The Royal Commission on Violence in the communications Industry, 1976. â€Å"TV Suicide Link: Fatal Retraction.† Science News.October, 1987: 218. â€Å"Suicide Belt.† Time. September 1, 1980: 56. Trafford, Abigail. â€Å"Death at an Early Age.† The Washington Post. June 6, 1995: 6. Waters, Harry, et al. â€Å"Teenage Suicide: One Act Not to Follow.† Newsweek. April 18, 1994: 49. Worsnop, Richard L. â€Å"Teenage Suicide.† CQ Researcher 1.6   Ã‚  Ã‚  Ã‚  Ã‚  (June 6, 1991): 371-91. Zirkel, Perry A. â€Å"Another Case of Student Suicide.† Phi Delta Kappa. 77 (Sept. 1995): 91-94.

International Trade Theory and Policy Essay

Multilateral trade negotiations forums are organizations established to regulate trade between many countries of the world. The agreement involves establishing organizations which regulate trade in the entire world. The increase in globalization has forced many countries to form regulatory organizations to avoid bad trade practices. To enhance trade many countries have created trade agreements to remove barriers to trade. Economic integration is the most important aspect discussed by the trade agreement organizations. The organizations aim at achieving an integrated economy where countries can trade with each other. After the World War II many leaders of the world felt that the economies of the destroyed countries could only be improved through trade. One of the proposals to improve trade was to create a laissez-faire global economy but this was rejected since it was not applicable. The leaders agreed to establish global trade organizations which would enhance trade by reducing the barriers to trade which had been placed by the countries. During the war many countries created strict barriers to trade to protect their economies from external influence (Anderson, 2005). The General Agreement on Trade and Tariffs was the first agreement to be established. The agreement was established to enhance trade between the member countries but was later converted into World Trade Organization (WTO). The International Monetary Fund was also created to regulate the economic status of the developing nations as well as regulate international economic activities (Smith, Sumner & Rosson, n. d. ). Reconstruction of the damaged economies after the World War II was the priority of these organizations. For many years several amendments have been made to accommodate the changing economic climate. Trade liberalization has been the most important aspect during the amendments. For example, according to Anderson. (2005, pg. 414), â€Å"the Uruguay Round of multilateral trade negotiations led to agreements signed in 1994 that contributed to trade liberalization over the subsequent 10 years. † Despite the many advantages accompanied by the establishment of the international trade organizations, there have been several disadvantages accompanied by the activities of opening up of domestic markets to international trade. An example is the global economic recession of the 2007-2009 that was experienced by the world economies after the banking industry and the mortgage industry collapsed due to poor financial practices by the U. S. banks. Importance of multilateral trade institutions The multilateral trade organizations were created to enhance trade and stability of the economies of the member countries. Initially they were established to reconstruct the economies which had been destroyed during the World War II. Many countries realized the importance of trade in improving the economies after the war. Trade was the only tool that could restore the original status of the economies. Before and during the war many countries had put a lot of trade barriers to prevent trade with other countries. Opening up domestic economies required negotiations with all countries of the world to enhance a more open economic system (Warnke, 1996). Multilateral trade institutions improve international trade since they encourage member countries to open up their domestic markets to international trade. Trade disputes are resolved more easily between and among conflicting countries, hence leading to a good relationship between countries. Production according to comparative advantage has been encouraged by the improvement in international trade. Countries are encouraged to produce goods which they can produce most economically. Different countries have different resources which give them the potential to create income generating products. Through international trade resources are utilized optimally since an economy will specialize in the production of products which it has greater advantages (Bernard et al. 2007). International trade has encouraged countries to specialize in the production of goods and services. The mobility of factors of production has been accelerated by globalization. More industries are encouraging division of labor to increase the productivity of labor factors of production. More industries have developed with the expansion of international trade. These industries create more employment opportunities to the citizens of a country. As the par capita income of the people increases their living standards is improved. Poverty alleviation campaigns have encouraged improved international trade as one of the strategies to enhance development of nations (Bernard et al. 2007). Opening up the domestic market to international trade creates more advantages than disadvantages. The international prices are lower than the domestic prices. The consumers obtain goods and services at lower prices. The competition created by the international trade encourages the domestic firms to be efficient in their production systems. The customers are provided with a wide variety of products to select from (Bernard et al. 2007). Multilateral trade organizations control the globalization of economies. Globalization refers to the international operation of business activities and the transfer of information between countries. Globalization has affected business activities both positively and negatively. Global markets have emerged and many companies are operating in several countries. This has created competitiveness of the companies since the global markets are larger than regional markets. Globalization is the process of integrating the global economies, societies and cultures by connecting communication and trade networks. Economic globalization refers to the integration of global economies by enhancing trade, foreign direct investment, sharing of technology, movement of people and flow of capital. The factors which influence the rate of globalization are the world economies, technology, and socio-cultural, political and biological aspects (Warnke, 1996). Globalization has improved the exchange of technologies and knowledge. This has increased the capacity of businesses to expand on the number of innovative products in the market. The public sector alone cannot accommodate all the skilled labor in a country and trade provides more employment opportunities for the people in a nation. As economies become more global people with skills can move to countries where there is high market potential for their labor. The introduction of internet has increased efficiency in trade by enabling people transfer information more easily. Trade attracts private investment and this generates more capital in the economy. The gross domestic product of a country increases with increase in trade. Growth and development of an economic is accelerated by trade since more income is generated and the living standards of the people are improved (Daniels, Radebaugh & Sullivan, 2007). Poverty levels in both developing and developed countries have declined by greater margins due to participation of countries in the international trade. Economies have acquired more wealth and the gross domestic product of countries has improved. WTO has become the custodian of international law on trade. The enforcement of trade laws about good trade practices has been possible after the creation of WTO. The establishment of regional and multilateral trade agreements was experienced after WTO was created. This has encouraged many countries remove barriers to trade (World Trade Organization 2010). Weaknesses of multilateral trade institutions Most of the multilateral trade organizations are affected by the political climate in the member countries. Any political war between the member countries can ruin the operation of the organizations. When the organizations support some political organizations; they affect the interests of the members and this reduces the delivery of the required obligations. Politically strong countries have dominated the operations of the multilateral organizations and this is causing a lot of concern to the global trade communities. Decision making at the trade organizations has become very difficult since many participants are not willing to accept rules which affect their economies negatively. Anderson (2005, pg. 417) suggests that â€Å"although trade can and should play an important role in allowing developing countries to lift themselves out of poverty, in reality international trade agreements and institutions have more often than not contributed to the continuation of global social and economic injustice. â€Å" The developed nations have dominated the multilateral trade organizations. For example, according to Anderson (2005, pg. 31) â€Å"with decision-making based on a consensus system, so each member has equal decision-making power, the WTO is held to be the most democratic of all the international institutions with a global mandate. In practice, however, the working methods of the WTO lack transparency, inclusiveness and equity. † There have been conflicts as the developing nations are becoming concerned about the great influence the developed nations have on the decisions in these organizations. Multilateral trade agreements are complicated to establish since many countries are involved. The interests of each country should be represented during the negotiations to ensure that conflicts do not arise afterwards (Amadeo, 2010). Despite the establishment of the trade organizations many countries continue to place more trade discrimination measures upon other countries. â€Å"They include not just trade taxes-cum-subsidies but also contingent protection measures such as anti-dumping, regulatory standards that can be technical barriers to trade, and domestic production subsidies† Anderson (2005, pg. 415). Many trade distortions have occurred since the global economies were established. Multilateral trade organizations have encouraged the opening up of economies to international market influence. The opening up of domestic markets has affected the global economies. Several disadvantages have been accompanied by the opening up of the domestic markets, for example, the global economic meltdown of the 2007-2008. The crisis started with the rise in prices for basic products due to the international increase in fuel prices. The prices of oil and food products increased within a short duration leading to an economic crisis which affected many people in US. The prices for many products increased and inflation was experienced all over the country. Many subprime borrowers had low incomes and the rise in prices for basic products increased the expenses for their living. Many companies retrenched employees to accommodate the increasing production costs. The borrowers were unable to repay the loans resulting to massive defaults. More than 100 subprime mortgage intermediaries filed for bankruptcy. Reacquisition of the houses from the defaulters caused a lot of people to become homeless (Platt, 2008). Subprime mortgages are policies which have a high risk of default. Subprime borrowers are the people with low incomes and have a poor credit history. They have higher risk of default compared to the prime borrowers. The US government had deregulated the real estate mortgages leading to massive investment in subprime mortgages. This caused the risky lending of subprime mortgages. The subprime mortgages were not popular initially but they became widely used in the 1990s. The climax of the sub prime mortgages was in 2006 when they accounted for more than 21 percent of all mortgages traded in the US market. The value of subprime mortgages in 2006 was valued at $600 billion. Many subprime mortgage intermediaries were established to reap the benefits of the expanding industry (Helleiner, 2009). The world economies have experienced a major decline due to poor performance of many industries. This is a crisis which has affected all sectors of the economy. Williams (2009) claims that the crisis was initiated by the subprime mortgage lending crisis in US. The banking sector issued many loans to subprime mortgage intermediaries. Due to the expanding market in the sub prime mortgage market many banks issued unsecured loans to the intermediaries. The climax of the boom was reached in 2007 when the prices of products started to increase and many subprime mortgage lenders were unable to repay their loans. This led to massive default of debts and banks registered huge losses. This reduced the lending capacity of many banks. The resulting effect was lack of credit in the economy and the collapse of many companies (Stapledon, 2009). The government of US is to be blame for the crisis. The 102nd Congress under the leadership of George W. Bush deregulated the housing sector in 1992 (Guttmann, 1994). The main aim was to increase the availability of money for buying housing. Fannie Mae and Freddie Mac companies were deregulated and could spend $97. 50 to buy housing loans. Banks with $100 could spend more than $90 buying mortgage loans. The companies had been ordered by the congress to retain more capital to for risk allowance but this was not practiced. Since 1992 the mortgage sector experienced the highest boom with many companies investing heavily in the sector. Subprime mortgage intermediary companies were developed to assist homeowners acquire loans from the banks (Stapledon, 2009). The banking sector was the worse hit by the crisis. Inter-bank lending declined and banks had no money to issue to their customers. Most of the banks collapsed while others registered huge losses. This was as a result of failure by many subprime mortgage intermediaries which defaulted the huge loans they had acquired from the banks. The central bank could not lead to all the banks due to the massive crisis that affected the entire country. Since US is a market for many commodities from other countries there was an extension of the crisis to other economies causing a global economic meltdown. Many economies declined since they had no market for their goods. Inflation increased as prices persistently increased. The entire world encountered economic crisis which resulted into failure by all sectors of the economy in the world (Stapledon, 2009). Many international organizations have intervened to eradicate the problem. The intervention by the World Bank has created better results in the efforts to reduce the impacts of the crisis. World Bank has issued loans to many countries to increase the income levels of the people. Many companies have been able to access loans due to the fun ding by World Bank. The availability of loans has increased since last year and many companies have regained their capacity (Bayne, 2008). The World Trade Organization has negotiated with the oil producing countries to reduce the oil prices as one of the measures to reduce the effects of the crisis. The global oil prices increased causing the prices of many products to rise. The high product prices caused inflation in the whole world. WTO has also encouraged trade by persuading some countries remove the trade barriers they had placed upon their trade partners when the crisis was at the climax (Stephen, T. 2008).

Organizational Culture at Apple Inc

Organizational Culture at Apple Inc. In the year 1976, it was a dream for most people to buy a computer for their homes. Back then the computer community added up to a few brainy hobbyists. So when Steve Wozniak and Steve Jobs sold a van and two programmable calculators for thirteen hundred dollars and started Apple Computers, Inc. , in Jobs garage, the reach for success seemed far. But these two young business men, Wozniak 26 years old and Jobs 21 years old, had a vision. Computers aren't for nerds anymore, they announced. Computers are going to be the bicycle of the mind. Low cost computers for everyone. From the first day on the founders of Apple kept their vision intact and they spoke it at every turn. They only hired people into the company that had the same visions as they did. Even though Jobs was the founder of Apple Computers, he resigned from Apple Computers in 1985 to form NextStep Computers after losing control of Apple. Steve Jobs was re-hired in 1997 to save Apple from its beleagurement when the past three CEO's could not bring Apple to its glory days again. Steve Jobs is one of the founders of the Apple. From the beginning his main goal was to make technologies that will change the life style and that will serve the customer. Jobs left the apple during the 80ies, only to return in 1997 and completely shake things up. He is known not only as a good visionare but as well as someone whose decisions are always unpredictable (switching to Intel). He is as well known for publicly provoking his competitors (Mac vs PC videos and talking how Michael Dell and his empire are far behind Apple when it comes to innovation and that they can only copy them. Knowing to implement excellent design to all of its products – Apple is putting a lot effort when it comes to design of all its products. After Steve jobs returned to the company, both desktop and laptop computers received new stylish helmets. Even the OS X and later Tiger had better appearance than Windows. Apple Computer, Inc. has experienced both the best of times and the worst of times. The further survival and success of this company will depend on what strategic course they decide to pursue. In order to do this, the company must first re-establish what it actually is and what it aims to become. It is important to start a course of action and develop a culture that understands and supports Apple’s mission. The computer industry is important for Apple. It should therefore concentrate in its expansion. However, survival in the computer industry depends on the development of new products and technology. Products are subject to quick obsolescence and being a leader in new products is essential. In the past, a budget was cut as a cost saving measure. This is still advised due to the importance of developing new technology. Another recommendation for Apple is to consider the licensing of clones. Apple is the only company in the PC market that makes both computers and the operating systems to run them, whereas the market is dominated by computers that combine Intel processors with Microsoft operating systems. Because of their financial situation, they need to better position themselves to quickly produce and distribute any newly developed products. For example, if they developed a revolutionary new product, cloning companies could assist in the production and distribution of this technology. Revenues would be generated from the licensing agreements. This could result in quickly establishing this new technology in the industry and re-establish Apple as a leader in technology development. Developing a better marketing and distribution of their products is a further recommendation for Apple. Apple products are not as available as PCs to the retail market. People should have as easy access to Apple products as they have on other PC’s. Next, Apple should develop an integrated and easy-to-use computer system. This system could be targeted to young children and older individuals that would be interested in using a computer but do not want the hassle of setting up equipment. Although there are many different strategies to consider, Apple’s future success will depend on their future strategic decisions. Next, Apple has proved to be much more innovative in the industry than Microsoft. By trying to be always one step further, Apple has managed to develop the iPod and iTunes, as well as the iPhone which are all complements to the digital industry. Microsoft has not developed anything new and original for a long time now. It seems that all they do is creating advanced version of the operating system that is not always compatible with the old ones. Unlike Microsoft who is desperately trying to buy Yahoo! nd stay competitive, Apple does not have to do anything to prove its popularity. It already has faithful customers and their numbers are increasing every day. The reason for this is Apple’s good knowledge in customer base. Apple’s move into new industry may have different effects on its core business. However, given the success of the iPod and iTunes as well as the further promotion on the iPhone, it is safe to say that Apple is doing well in both industries. This means that Apple has already shifted in a different direction (digital music) but so far it has had a lot of success. In fact, some people might have heard about the iPod first, and then found out that Apple is actually a big and successful company that manufacturers computers as well. If a customer is satisfied with one product, he/she will be willing to buy another from the same company. If a person sees that Apple is selling all of these different products, and they are all popular and good quality, there is no reason why this person would not buy from Apple. Apple already has loyal customers and any innovation that may happen could only lead to more success. It will also increase its profits and gain more popularity. This is why, we believe that moves into new industry might impact Apple’s core business, but in a good way – bring better promotion and reputation. There are number of reasons why apple is set up for success within computer and music industry. It designs a very good quality, compatible hardware and software products. The operating system that runs on the Mac hardware (Mac OS X) remains as the major advantage over any version of Microsoft poor quality operating system with a lot of viruses, worms, spyware, and adware. Apple creates programs that run on Mac Os X operating system, and this brings bigger market share. Apple is set up for success because it targets a niche market: the Apple users. As the case study presents, it creates its own miniature techno-environment, economy with a wide range of products offered to their clients, this builds up their market share, and strengthens their position, creating future loyal customers. Apple sets up its own stores to display their products; in this way it catches new potential clients. Apple launched many advertising campaigns; one of them featured â€Å"real people† who had â€Å"switched† from the Microsoft Windows platform to the Mac. A popular advertising slogan â€Å"Think Different† remained the integral part of Apples identity. Put simply, Apple approaches the customers, with original, funny ads, this precipitates to the creation of the products considered as fashionable, well designed and build on Apple technology. Apple owns a big share of the market, which makes it easier for the future success. It is better to work for Apple because it s a dynamically growing company with well developed campuses where the employees play and work at the same time. With the high technology used in the Apple product, employee can participate in the development or learn how company like Apple works. Apple is a rewarding environment in which employees can build their career using their special skills and talents. Apple is looking for newly graduated stude nts, and professional programmers who are looking for work sacrificed for people who would like to work in different departments, starting from Mac Hardware Engineering finishing on Retail. It is worth working for a company like Apple because of the success that the company has achieved. Steve Jobs has done an amazing job at revitalizing Apple Computers. He took over Apple when it was at the brink of death, and brought back with much life. In spite of the bad publicity about its unprofitable quarters, predictions about its death, falling market share, and advice on how to save the business (i. e. make Windows compatible hardware), Jobs continued to prove the critics wrong. Even with the 5% market share, Apple is trying hard to increase its market share. As the world’s lowest paid CEO at $1 per year (Guinness World Records, 2000), Jobs strives to make Apple provide the best computing experience to its users. To be a successful CEO, one must understand the market they are competing in. Even though the previous CEOs did not have any computer related experiences, but was highly successful and regarded at their previous positions. The CEOs did fail to adapt their strategies remain competitive in the computer market. Scully could not maintain the competitive advantage it once had, and the other two CEOs did not have the right strategies to bring Apple back to its glory. Because they did not fully understand the computer market as Jobs had done, they unsuccessfully struggled to keep Apple from falling farther down the market. With Jobs deep understanding of the computer market as a pioneer in two businesses, consumer, and a technician, he implemented many of the strategies Apple should have done in the beginning. His added value to the Mac with software, customized the products to a target market, and simplified the product chart. Steve Jobs has successfully saved Apple from death, but he faces a greater challenge, increasing market share. As long as Jobs can maintain Apple’s competitive advantage and sustain it, increasing market share should not be too much of a problem. References http://www. bloggingstocks. com/category/battle-of-the-brands/2. http://piqued. brianfrantz. com/? s=apple3. www. dailyindia. com4. http://www. operating-system. org/betriebssystem/_english/bs-macos.

Hadith of Gabriel Essay Example

Hadith of Gabriel Essay Example Hadith of Gabriel Essay Hadith of Gabriel Essay Our faith gives us the enlightenment to make what’s best non merely for ourselves but for the full kingdom that we belong every bit good. It serves as our usher to the way of fantastic ideas and bright actions which will come to illume to the personality that we possess as of the minute. What will be within our character was the ultimate part of what our faith has thought us. In this respect. we could perchance express that Islam has been one of the great parts in this clip and age. It depicts a really good sense of duty which could assist to augment the system that we have within ourselves. The instructions of the Qur’an stress the duty of the person to society and of society to individual ( Bloomington. 2002. p. 262 ) . as we have noted. Qur’an serves as our usher to the right way and finally arouse us to recognize what are the best things that we could accommodate in order to populate in the visible radiation of Islamic ideas and ways. It has been said that it entails a immense duty as we get a clasp on its instructions fundamentally for the ground that it is non self centered and it focuses on the proliferation of the full kingdom. One can achieve absolute satisfaction if his environment goes with it – intending the society where you are presently into should goes manus in manus with the good ideas that you believe in. and this was fundamentally what Islam wanted to set up in its people. Take for case the duty of paying zakat wherein people are oblige to pay on a regular basis which in bend the hapless will profit such. : Indeed. non all are convinced that they should pay such zakat and alternatively. they prefer to merely give alms to the less fortunate wholeheartedly. In position of which. what the Qur’an has embarked to its people was the gesture that at any rate we should love our neighbours irrespective of their position in life. This positive vibration should be taken into consideration because this is one of the great instructions of the Islamic faith. Similarly. what were epitomized in the Hadith of Gabriel were the strong foundations of the faith of Islam. It embarks the five pillars per Se of Islam which was considered as its strong foundation. Islam is to attest that there is no God but Allah and Muhammad is the courier of Allah. to execute the supplications. to pay the zakat. to fast in Ramadan. and to do the pilgrims journey to the House ( Tauris. 1996. based on interlingual rendition found at World Wide Web. salaam. co. uk ) . Submission of oneself to Allah was the ultimate ladder to Islamic beliefs. Believing in His ultimate powers was the key to holding a strong religion in His instructions. He is the 1 who could present felicity to the full kingdom as we follow His ways to the right sphere of life. There is no God but Allah and Muhammad is the courier. This strong attachment of religion delivers us to be enlightened with the good ideals of genuinely believing and opening our Black Marias to make good workss in conformity to the wisdom of Allah. Furthermore. as we established our ways in stead of the instructions of Allah. everything is expected to proliferate for the fact that it has been guided by the Godhead Allah. Performing supplications was besides one of the foundations of Islam. Praying non merely limits us to intone or even praise Allah. but it derives us a immense sense of set uping our religion and continuously have in head all the goodness that the faith of Islam embarked within us. The subject of praying and acquiring focal point was one of the great ways to construct our personality that Allah believes to be indispensable in constructing the character of a individual. Pay the zakat and give alms to the hapless was one of the high spots of being a good individual. and for that affair a celebrated follower of Allah’s instructions. Loving our neighbour was on top of everything because this is the minute in our lives that we are bound to appreciate all the goodness that our fellowman can give us. In every small manner that we could offer love was highly a immense duty to the character that we have within and this lone proves that we are perfectly enlightened by the will of Allah. In add-on to this. this is besides a good representation how we genuinely grasp His instructions as we put into actions all the wisdom that He has given us. Paying zakat entirely gives a enormous impact since as we all knew this will profit our less fortunate fellowmen. Giving alms to the hapless was another context of charitable Acts of the Apostless which will distribute the sort of duty and love that Allah wanted us to present. To fast in Ramadan every bit good as pilgrims journey to Mecca was another context of what Allah thought us what duty was all about. In this respect. this is an huge conscientiousness for us because fasting was a mark of unequivocal attachment to faith and following ways of Islam. Indeed. making what is good is the manner to Allah’s instructions. His fantastic purposes of doing His people become witting of the good workss were fundamentally His best ideals. On our portion. we merely have to incessantly swear His ways and maintain on loving our fellowmen since it is the focal point of all Allah’s ways. We can truly contribute to the kingdom that we are into the best possible manner with the counsel of Allah. The foundations of Islam were a good representation on how we could move the right manner. The Hadith of Gabriel shed us visible radiation to be able to recognize how steadfast the foundation of Islam was and truly it guides us to be a better individual with strong attachment to our religion and has intense love for our fellowmen.

Current Issues for Strategic Information Systems Report Essay

Current Issues for Strategic Information Systems Report - Essay Example Lastly, the report offers a summary recommendation for technology adoption by GLM in future, including a costs outline of such an undertaking. The analysis of the impact of adopting future technology enables the company to identify technologies that prove beneficial (Palvia, 2003:161). The implementation of such technologies is integral to the sustainability and growth of GLM. Introduction The report has several parts that comprehensively analyze the adoption and benefits of new technology in the company as far as information systems and information management (IS and IM respectively) improvements are concerned (Ward and Joe, 2002:74). The first part reviews the present status of the IS and IM at GLM, and the impact of adoption of future technologies to the organization’s business culture, model, and structure in the next five years. ... The last part provides a set of recommendation to the organization with a clear outline on financial costs. This report highly recommends that GLM implement these proposals in order to achieve cost saving, improve the workplace environment, meet the demands of current and potential customers, and remain competitive in their market. Review of the Current IS and Future Technologies at GLM The Current GLM’s IS The current IS at GLM has potential for improvement. Drawing upon the pre-workshop document on the company’s IS system, the implementation, and use of information systems is less than ideal. This report provides an overview of the areas presently with IS in the organization in appendix 1 (Travis, 2004:94). From a consultant’s point of view, there is need for improvement on these areas, as discussed later in the report. Future Technologies Technology in the modern world is an integral asset to organization. This is evident from the increasing number of organiza tion and individuals embracing technology in the global market. It has thus become imperative for organizations to adopt technology in order to compete and expand effectively in the market. In this regard therefore, the objective by GLM to expand into the global market must go in hand with adoption of current technology, which will enable it to meet the needs of its current customers as well as attract technology-enthusiastic customers. Thus, GLM needs to leverage this knowledge and subsequently enhance the work processes and communication channels. To achieve this, this report analyzes the technologies that may prove beneficial to the business culture, business model, and structure of GLM as an organization. Among the most significant technologies, include cloud computing, customer relationship

Cultural Controversy Essay Example | Topics and Well Written Essays - 500 words

Cultural Controversy - Essay Example The long and short-term effects it has on girls mental, physical and reproductive health renders the term circumcision inapplicable. Furthermore, the process is considered an abuse of human and more so children rights since it is often performed on young girls (World Health Organization). While the proponents insist, the term Female Genital is meant to dehumanize it, the truth is; the term describes it and any objective description of the torturers process is enough to dehumanize it. It is most prevalent in sub Saharan Africa especially among the Somali culture and several others, North, East and horn of Africa communities especially Somalia and Ethiopia (Reymond, et al n.d). In the United Kingdom, girls fall also victim to this senseless ritual, during the summer holiday, which is the longest for schoolchildren. Many girls of African descent, as young as five are sent off to Somalia and elsewhere they are put through this scaring process (Foreign and Commonwealth Office). The tools used are often not sterile, and the resulting wounds can result in fatalities especially when it is done in Africa by illiterate old women trying to uphold â€Å"culture.† It also poses a significant risk of complication during childbirth; this is evidenced by the fact that infant mortality rates are often notably higher in countries that are known to practice FGM. Besides, the removal of the clitoris ensures they can never hope to enjoy sex in posterity. Ultimately, FGM is an extremely painful and inhuman procedure that no girl should have ever to undergo and in most countries, even in Africa it has been outlawed and is only done in